Raised Floor

100% accredited

CSCS Accredited installers also on NVQ Scheme

100% snag free

Across all jobs & within 14 days of installation

0 Accidents

No reportable accidents in the last 5 years

Be it, Metal decking or concrete beams...

We're specialists in laying concrete for raised floors

We lay more upper floors than anyone in the country due to our partnerships with the largest decking & beam installers. In addition to these contacts, we also work directly for many other clients and end users.

Fully Accredited Installers

Contractors are fully certified and accredited with CSCS on concrete NVQ schemes

100% Snag Free Promise

We don't leave any job unfinished, and we promise to rectify any issues within 14 days

Over 200,000 square metres laid

In 2017 we laid over 200,000 square meters of concrete in multi-storey buildings

CONCRETE FOR RAISED FLOOR

Choosing the right stuff

Preparation Options

The nature of raised floors in a multi-storey is to form functional floors for structure and fireproofing. Typically you’ll need a metal or concrete slab decking to be provided by others to allow us to pour concrete on. The decking contractor would normally install edge trim to retain the concrete and fill any gaps in the decking. We can then install steel reinforcement and mesh as required with day joints prior to pouring.

Types of Lay

For raised floors the key restriction to the project is the ability for access. A raised floor typically has low requirements for levelness so Screed Rail or Hand Lay methods are both suitable. Most clients opt for the Hand Lay methods as its the most cost efficient for the results required. Most raised floors are laid to a uniform thickness that follows the movement and flex of the decking, but with screed rails and propping, we have achieved tolerances as high as FM3. (More information on Floor Tolerance Classes)

Finishing Considerations

A raised floor can usually be left with just a skipfloat finish as high flatness levels are rarely required. In some instances, when you plan to have an exposed concrete floor or thin overlay, you will want to consider a Power Float finish. Most raised floors are finished to an SR3 Tolerance. (More information on Floor Tolerance Classes)

Case Studies

Raised Floor Slab Project Examples

We are regularly tasked with the implementation of raised floors for office blocks and apartments, student blocks, and hospitals. See our case studies here.

Ask for a quote or request more info from our expert team

We work across large and small jobs for both for commercial or private clients, ask us a question and see how we can help.

call us on
0161 244 9764

email
info@cbsconcreting.co.uk

0.

Reportable accidents in 2017 over 100,000 hours worked

100%

of installers accredited and certified with CHAS

100%

satisfaction across all raised floors installed

100%

of raised floors completed on time and to specification

This website uses cookies for functionality and allow us to analyse the use of the site. To opt out please view our Cookie Policy. If you continue to browse the site, we'll assume you agree to the use of cookies. [ Hide Notice ]