Power Float Concrete

Power float concrete image by CBS

Power Float Concrete

Power float concrete results in a hard wearing finished surface, suitable for high trafficked areas both foot and fork lift dependent on depth. Power float machines are fitted with circular pans to help smooth the concrete before metal blades are rotated over the surface adjusting the tilt to achieve a hardened surface.

Before the concrete can be power floated it has to be left to harden, so a concrete installed in the morning cannot usually be power floated until late afternoon dependent on the mix and outside conditions. Power-floating produces a flat smooth dense finish. Min depths are 75mm bonded, 100mm un-bonded for foot traffic and designed between 150mm – 350mm dependant on loadings for trafficked areas. Drying times for foot traffic are 24 hours, the concrete dries at approximately 1mm per day and should not be force dried. These type of floors can be reinforced with Mesh, plastic or steel fibres, dependant on use and loadings.


Power Float Concrete from CBS Concreting

Power floated floors are hard wearing and require no further finishes, however, resins, polishing and screeds can all be applied to the surface. Why Order Power Floated Concrete with us? We consider the finished use of the floor and can design the structural floors to meet your requirements. Our experienced team has over 35 years of input into designing flooring solutions for high street retailers, schools, offices and warehouse facilities.

S5 Box